Some prefer that the sash-bars should be grooved instead of rebated, and this plan exposes less putty to the action of the weather. [Please select]
0
61 (A) shows the well-known "Oxford frame," illustrating halved joints when the edge is rebated. [Please select]
0
165 shows how to tenon a moulded sash bar to the rebated cross rail. [Please select]
0
The holes in both pieces are bored for the dowels before they are rebated. [Please select]
0
257 is similar to the above, with the exception that the rail of the door is rebated (G) to receive the astragal moulding. [Please select]
0
260 is a rebated joint, broken at the front by a bead moulding. [Please select]
0
In the former case the stiles are rebated (as already shown in Fig.) [Please select]
0
265 is a rebated joint with loose tongue-slip and astragal mould, suitable for frames over 1-1/4 in. [Please select]
0
There are, however, exceptions to this rule, as in the case of "three-piece halving" (or, as it is sometimes called, "third lapping") and in the halving of timber with rebated or moulded edges. [Please select]
0
In this and similar cases the side rails are rebated as shown in the section, and the bottom rail is thinner than the side rails to allow the glass to finish level upon it. [Please select]
Do you have a better example in your mind? Please submit your sentence!